MCP111T-315E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP111 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.034V |
| Max Reset Threshold Voltage | 3.126V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.034V |
| Overvoltage Threshold | 3.126V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP111T-315E/TT Overview
A total of 3 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. Pin count of the power management is 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 1.75μA. To find similar IC managements from the manufacturer, you can always search by MCP111. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
MCP111T-315E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-315E/TT Applications
There are a lot of Microchip Technology MCP111T-315E/TT Voltage Supervisors applications.
- Display equipment
- Military communications
- Cloud computing
- Network equipment
- Detection of phase sequence
- Power distribution systems of operating room
- Fire equipment power monitoring system
- Solar power charger
- Set top box
- Efficient information transmission
