MCP111T-450E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP111 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.314V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.314V |
| Overvoltage Threshold | 4.446V |
| Height | 1.016mm |
| Length | 3.0226mm |
| Width | 1.397mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP111T-450E/TT Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. 3 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 1.75μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP111, which is the base power ics number. A maximum supply temperature of 1.75μA can be used.
MCP111T-450E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-450E/TT Applications
There are a lot of Microchip Technology MCP111T-450E/TT Voltage Supervisors applications.
- Solar power charger
- Electric heating appliances
- Precision measurement
- Kitchen appliances
- External alarm
- Power communication system
- Battery cars
- Functional modules
- Leakage protection
- DSP
