MCP111T-475E/LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP111 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.561V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.561V |
| Overvoltage Threshold | 4.7V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP111T-475E/LB Overview
As you can see, this power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. Please find attached SC-70, SOT-323 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 1.75μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by MCP111. A maximum supply temperature of 1.75μA can be used.
MCP111T-475E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-475E/LB Applications
There are a lot of Microchip Technology MCP111T-475E/LB Voltage Supervisors applications.
- Precision measurement
- Power distribution systems of ICU
- Low voltage/high power - AI, GPU
- Display equipment
- Detection of phase loss
- Fire equipment power monitoring system
- Unattended substation automation
- Medical-specific isolation transformer
- Automotive power systems
- Battery-powered equipment
