banner_page

MCP111T-475E/MB

3 Terminals 3-Pin MCP111 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP111T-475E/MB
  • Package: TO-243AA
  • Datasheet: PDF
  • Stock: 810
  • Description: 3 Terminals 3-Pin MCP111 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-243AA
Number of Pins 3
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Terminal Position SINGLE
Terminal Form FLAT
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP111
Output Open Drain or Open Collector
Pin Count 3
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 1.75μA
Max Supply Current 1.75μA
Adjustable Threshold NO
Quiescent Current 1μA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 4.63V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 4.561V
Max Reset Threshold Voltage 4.7V
Threshold Voltage +4.63V
Undervoltage Threshold 4.561V
Overvoltage Threshold 4.7V
Length 4.5mm
Width 2.445mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP111T-475E/MB Overview


There are 3 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. There are TO-243AA functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. 3 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 1.75μA is the recommended value. It is always advisable to use MCP111, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 1.75μA at the most.

MCP111T-475E/MB Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111T-475E/MB Applications


There are a lot of Microchip Technology MCP111T-475E/MB Voltage Supervisors applications.

  • Urban rail transit weak current power monitoring
  • WiFi router
  • Electric heating appliances
  • Leakage current detection
  • Medical-specific insulation monitor
  • Set top box
  • Electronics installed in the vehicle
  • Smart meter
  • Utility meter
  • Solar power charger

Write a review

Note: HTML is not translated!
    Bad           Good