MCP111T-475E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP111 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 45μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.561V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.561V |
| Overvoltage Threshold | 4.7V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP111T-475E/TT Overview
Power management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 1.75μA volt supply current. It is always advisable to use MCP111, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 1.75μA.
MCP111T-475E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-475E/TT Applications
There are a lot of Microchip Technology MCP111T-475E/TT Voltage Supervisors applications.
- Electronics installed in the vehicle
- Dash board
- Linux and server computing
- Magnetic resonance imaging
- Battery cars
- Automotive permanent magnet synchronous motors
- Precision measurement
- Power distribution systems of ICU
- Microcontroller system
- Data storage applications
