MCP112-270E/TO
| Parameters | |
|---|---|
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.591V |
| Max Reset Threshold Voltage | 2.67V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.591V |
| Overvoltage Threshold | 2.67V |
| Height | 4.62mm |
| Length | 4.71mm |
| Width | 3.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Bulk |
MCP112-270E/TO Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaging is in the form of a Bulk. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. Pin count of the power management is 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 1.75μA. For similar manage ics search of the manufacturer, you can always refer to MCP112, the base PMIC number. The maximum supply temperature is 1.75μA.
MCP112-270E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112-270E/TO Applications
There are a lot of Microchip Technology MCP112-270E/TO Voltage Supervisors applications.
- Utility meter
- Smartphones
- Refrigeration
- DSP
- DVR
- Network equipment
- Power distribution systems of infant care room
- Unattended substation automation
- Automotive permanent magnet synchronous motors
- Battery cars
