MCP112-300E/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.886V |
| Max Reset Threshold Voltage | 2.974V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.886V |
| Overvoltage Threshold | 2.974V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP112-300E/TO Overview
A total of 3 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Bulk. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management conducts in a 1-voltage supply. The mount is attached to Through Hole. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 3 pins on the board. This power management system has 3 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Through Hole. The supervisors should be set to the following temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 1.75μA supply current present in the power management. It is always advisable to use MCP112, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.75μA can be used with this power management.
MCP112-300E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112-300E/TO Applications
There are a lot of Microchip Technology MCP112-300E/TO Voltage Supervisors applications.
- DVR
- Set top box
- Smart meter
- Power distribution systems of CCU
- Cloud computing
- Important electronics for automotive safety
- Battery cars
- Detection of phase loss
- Magnetic resonance imaging
- Kitchen appliances
