MCP112T-270E/LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.591V |
| Max Reset Threshold Voltage | 2.67V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.591V |
| Overvoltage Threshold | 2.67V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP112T-270E/LB Overview
Power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a SC-70, SOT-323 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 3. This power management system has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. The power management can work with a maximum supply temperature of 1.75μA.
MCP112T-270E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-270E/LB Applications
There are a lot of Microchip Technology MCP112T-270E/LB Voltage Supervisors applications.
- Set top box
- Solar power charger
- Embedded computing
- Military electronics
- Important electronics for automotive safety
- Detection of phase loss
- Medical-specific isolation transformer
- Power distribution systems of operating room
- Insulation fault location system
- Dash board
