banner_page

MCP112T-270E/MB

3 Terminals 3-Pin MCP112 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP112T-270E/MB
  • Package: TO-243AA
  • Datasheet: PDF
  • Stock: 125
  • Description: 3 Terminals 3-Pin MCP112 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Terminal Position SINGLE
Terminal Form FLAT
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP112
Output Push-Pull, Totem Pole
Pin Count 3
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 1.75μA
Max Supply Current 1.75μA
Adjustable Threshold NO
Quiescent Current 1μA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.63V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.591V
Max Reset Threshold Voltage 2.67V
Threshold Voltage +2.63V
Undervoltage Threshold 2.591V
Overvoltage Threshold 2.67V
Length 4.5mm
Width 2.445mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-243AA
Number of Pins 3
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3

MCP112T-270E/MB Overview


A total of 3 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of TO-243AA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 3. This power management has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.

MCP112T-270E/MB Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP112T-270E/MB Applications


There are a lot of Microchip Technology MCP112T-270E/MB Voltage Supervisors applications.

  • Digitally controlled LDO regulators circuit
  • Automotive power systems
  • Smart meter
  • Power distribution systems of infant care room
  • Microcontroller system
  • Sensitive sensors
  • Network equipment
  • External alarm
  • Refrigeration
  • Military communications

Write a review

Note: HTML is not translated!
    Bad           Good