Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-70, SOT-323 |
Number of Pins |
3 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1998 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP112 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Output Type |
Voltage |
Max Output Current |
10mA |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
1.75μA |
Nominal Supply Current |
1μA |
Max Supply Current |
1.75μA |
Adjustable Threshold |
NO |
Quiescent Current |
1μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.93V |
Number of Voltages Monitored |
1 |
Min Reset Threshold Voltage |
2.886V |
Max Reset Threshold Voltage |
2.974V |
Threshold Voltage |
+2.93V |
Undervoltage Threshold |
2.886V |
Overvoltage Threshold |
2.974V |
Height |
1mm |
Length |
2.25mm |
Width |
1.35mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP112T-300E/LB Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes SC-70, SOT-323 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 1.75μA is the recommended value. You can always use MCP112, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 1.75μA at the most.
MCP112T-300E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-300E/LB Applications
There are a lot of Microchip Technology MCP112T-300E/LB Voltage Supervisors applications.
- Display equipment
- Microprocessor system
- Detection of phase loss
- Solar power charger
- Military electronics
- Microcontroller system
- Refrigeration
- Cloud computing
- Electrical fire monitoring system
- Fire equipment power monitoring system