MCP112T-300E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.886V |
| Max Reset Threshold Voltage | 2.974V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.886V |
| Overvoltage Threshold | 2.974V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP112T-300E/TT Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 3 pins are located on this power management. This power management system has 3 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supervisor's supply current is specified to 1.75μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP112, which is the base power ics number. A maximum supply temperature of 1.75μA can be used with this power management.
MCP112T-300E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-300E/TT Applications
There are a lot of Microchip Technology MCP112T-300E/TT Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Data storage applications
- Power distribution systems of CCU
- Battery cars
- Transformer load monitoring equipment
- Smart meter
- Power distribution systems of ICU
- Rechargeable batteries
- Household appliances
- DSP
