MCP112T-315E/LB
| Parameters | |
|---|---|
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.034V |
| Max Reset Threshold Voltage | 3.126V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.034V |
| Overvoltage Threshold | 3.126V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
MCP112T-315E/LB Overview
As you can see, this power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-70, SOT-323 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. The pins of the power management system count 3. Supply voltage (Vsup) should be at least 1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 1.75μA. To find similar IC managements from the manufacturer, you can always search by MCP112. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
MCP112T-315E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-315E/LB Applications
There are a lot of Microchip Technology MCP112T-315E/LB Voltage Supervisors applications.
- Automotive power systems
- Power distribution systems of operating room
- Refrigeration
- Transformer load monitoring equipment
- Solar power charger
- Functional modules
- Battery-powered equipment
- Power communication system
- Low voltage/high power - AI, GPU
- Unattended substation automation
