MCP112T-450E/LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.314V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.314V |
| Overvoltage Threshold | 4.446V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP112T-450E/LB Overview
This power management consists of 3 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 3 pins on IC management. 3 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 1.75μA. You can always use MCP112, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
MCP112T-450E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-450E/LB Applications
There are a lot of Microchip Technology MCP112T-450E/LB Voltage Supervisors applications.
- Detection of phase imbalance
- emergency room
- Telecommunications equipment
- Display equipment
- Smartphones
- Satellite navigation
- Electric heating appliances
- Microprocessor system
- Detection of phase loss
- Rechargeable batteries
