MCP112T-450E/MB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-243AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | SINGLE |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.314V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.314V |
| Overvoltage Threshold | 4.446V |
| Length | 4.5mm |
| Width | 2.445mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP112T-450E/MB Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-243AA functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 3 pins are located on this power management. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 1.75μA volt supply current. It is always advisable to use MCP112, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.75μA can be used.
MCP112T-450E/MB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-450E/MB Applications
There are a lot of Microchip Technology MCP112T-450E/MB Voltage Supervisors applications.
- Network equipment
- Smartphones
- Microprocessor system
- Solar power charger
- Fire equipment power monitoring system
- Electric heating appliances
- Power distribution systems of CCU
- Battery cars
- DSP
- Stable power system
