banner_page

MCP120-270I/SN

5V8 Terminals 8-Pin MCP120 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP120-270I/SN
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 388
  • Description: 5V8 Terminals 8-Pin MCP120 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Quiescent Current 45μA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.625V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Min Reset Threshold Voltage 2.55V
Max Reset Threshold Voltage 2.7V
Threshold Voltage +2.63V
Undervoltage Threshold 2.55V
Overvoltage Threshold 2.7V
Length 4.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1998
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP120
Output Open Drain or Open Collector
Pin Count 8
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 60μA
Nominal Supply Current 60μA
Max Supply Current 60μA
Adjustable Threshold NO

MCP120-270I/SN Overview


There are 8 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tube. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 5V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 8 pins. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 60μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MCP120, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 60μA.

MCP120-270I/SN Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP120-270I/SN Applications


There are a lot of Microchip Technology MCP120-270I/SN Voltage Supervisors applications.

  • WiFi router
  • Functional modules
  • Power communication system
  • Analog circuit
  • Automotive permanent magnet synchronous motors
  • Radar
  • Network equipment
  • Detection of phase sequence
  • Electrical fire monitoring system
  • Utility meter

Write a review

Note: HTML is not translated!
    Bad           Good