MCP120T-270I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP120 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP120T-270I/TT Overview
This power management consists of 3 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a 60μA supply current present in the power management. You can always use MCP120, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 60μA.
MCP120T-270I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP120T-270I/TT Applications
There are a lot of Microchip Technology MCP120T-270I/TT Voltage Supervisors applications.
- Important electronics for automotive protection
- Digitally controlled LDO regulators circuit
- Leakage current detection
- Embedded computing
- Automotive permanent magnet synchronous motors
- Detection of phase loss
- Household appliances
- Electric heating appliances
- Personal computers
- Power distribution systems of infant care room
