MCP120T-300I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP120 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP120T-300I/SN Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 5V supply voltages. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a 60μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MCP120, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 60μA.
MCP120T-300I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP120T-300I/SN Applications
There are a lot of Microchip Technology MCP120T-300I/SN Voltage Supervisors applications.
- Unattended substation automation
- Analog circuit
- WiFi router
- Battery cars
- Low voltage/high power - AI, GPU
- Multi-voltage system
- Electrical fire monitoring system
- Radio
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
