MCP120T-450I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP120 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 1.016mm |
| Length | 3.0226mm |
| Width | 1.397mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP120T-450I/TT Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 5V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. Pin count of the power management is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 60μA. You can always use MCP120, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 60μA.
MCP120T-450I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP120T-450I/TT Applications
There are a lot of Microchip Technology MCP120T-450I/TT Voltage Supervisors applications.
- Important electronics for automotive protection
- Consumer electronics
- Medical-specific isolation transformer
- Network equipment
- Household appliances
- Radio
- Telecommunications equipment
- Efficient information transmission
- Military electronics
- Stable power system
