MCP121T-195I/LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP121 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 20μA |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 1.872V |
| Max Reset Threshold Voltage | 1.929V |
| Threshold Voltage | +1.9V |
| Undervoltage Threshold | 1.872V |
| Overvoltage Threshold | 1.929V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP121T-195I/LB Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. Pin count of the power management is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 20μA. You can always use MCP121, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 20μA.
MCP121T-195I/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current
MCP121T-195I/LB Applications
There are a lot of Microchip Technology MCP121T-195I/LB Voltage Supervisors applications.
- Medical-specific insulation monitor
- Dash board
- Refrigeration
- Smart meter
- Battery cars
- Consumer electronics
- FPGA design
- Unattended substation automation
- Radar
- Efficient information transmission
