MCP121T-300E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP121 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 2.866V |
| Max Reset Threshold Voltage | 2.974V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.866V |
| Overvoltage Threshold | 2.974V |
| Height | 950μm |
| Length | 2.92mm |
| Width | 1.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP121T-300E/TT Overview
This power management consists of 3 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The power management's supply current is 20μA. You can always use MCP121, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 20μA at the most.
MCP121T-300E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current
MCP121T-300E/TT Applications
There are a lot of Microchip Technology MCP121T-300E/TT Voltage Supervisors applications.
- Functional modules
- emergency room
- DSP
- Computer applications
- Multi-voltage system
- External alarm
- Display equipment
- Detection of phase loss
- Power distribution systems of operating room
- Battery cars
