MCP1252T-ADJI/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1252 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Current - Output | 120mA |
| Max Output Voltage | 5.5V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 650kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.5V |
| Switcher Configuration | BUCK-BOOST |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1252T-ADJI/MS Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. In this voltage regulator, there are a total of 8 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. 1 outputs of voltage regulator are configured. ICs such as this voltage regulator are capable of generating Adjustable outputs through their output pins. This switching regulator is designed to fit the Surface Mount mounting system. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. A DC-DC switching regulator of this type operates at a switching frequency of 650kHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2V. This voltage regulator 12v offers maximum design flexibility with an output current of 120mA. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6V for operation. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. DC/DC regulators of this type are part of the MCP1252 family of voltage regulator 12vs. A voltage of 5.5V volts can be generated by DC DC switching regulator. In order to operate voltage regulator, there are 8 pins that must be connected. As a general rule, this voltage regulator 12v should keep its output voltage at least at 1.5V. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5.5V, which is the highest available. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 2V volts. An operating voltage of 5.5V is the maximum supply voltage DC DC switching regulator can operate at.
MCP1252T-ADJI/MS Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MCP1252T-ADJI/MS Applications
There are a lot of Microchip Technology MCP1252T-ADJI/MS Voltage Regulators applications.
- Communication system
- Analog precision reference circuits
- Linear guide
- Precision electronic equipment
- Industrial controllers
- Plate bending machines
- Product burn-in
- Telecommunications equipment
- Household control circuits
- Handheld GPS
