MCP1253-33X50I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Current Rating | 80A |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1253 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Programmable |
| Max Output Current | 120mA |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.1V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Current - Output | 120mA |
| Voltage - Output (Min/Fixed) | 3.3V 5V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | BUCK-BOOST |
| Nominal Output Voltage | 3.3V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1253-33X50I/MS Overview
For optimal performance, this voltage regulator uses the Tube package. In this voltage regulator, there are 8 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHED CAPACITOR REGULATOR. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are 1 outputs configured on this voltage regulator 12v. Adjusting voltage regulator's output pins generate Programmable output. This switching regulator is designed to fit the Surface Mount mounting system. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.7V. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 3.3V 5V. Featuring a 120mA output current, dc to dc voltage regulator offers maximum design flexibility. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. To meet the switching regulator operation requirements, a nominal input voltage of 3.6V is provided. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. This DC/DC regulator belongs to the MCP1253 family. The voltage DC DC switching regulator can provide is up to 5V volts. There are 8 pins that are used for the operation of the voltage regulator 12v. For switching regulator maximum operation, dc to dc voltage regulator delivers 120mA A. In this case, a dc to dc voltage regulator's minimum supply voltage of 2.1V volts is required to ensure reliable performance. As long as the supply voltage is greater than 5.5V, the voltage regulator 12v will operate correctly. A frequency of 1MHz allows dc to dc voltage regulator to maintain high accuracy.
MCP1253-33X50I/MS Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MCP1253-33X50I/MS Applications
There are a lot of Microchip Technology MCP1253-33X50I/MS Voltage Regulators applications.
- Communication system
- Bending machines
- Hydraulic presses
- Die casting equipment
- Injection molding machinery
- Balance equipment
- Production lines
- Plate bending machines
- Machining centers
- Emergency lighting monitoring equipment
