MCP1253T-33X50I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1253 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5V |
| Output Type | Programmable |
| Max Output Current | 120mA |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.1V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Voltage - Output (Min/Fixed) | 3.3V 5V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 5V |
| Switcher Configuration | BUCK-BOOST |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1253T-33X50I/MS Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. In this voltage regulator, there are a total of 8 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHED CAPACITOR REGULATOR voltage regulator. The space-saving 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is available for this voltage regulator. 1 outputs have been configured in the voltage regulator 12v. Adjusting voltage regulator's output pins generate Programmable output. This switching regulator is designed to fit the Surface Mount mounting system. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. 1MHz is the switching frequency of this DC-DC switching regulator. Regulator 2.7V can operate with dc to dc voltage regulator's minimum input voltage 2.7V. The adjusting voltage regulator's output voltage (Min/Fixed) is 3.3V 5V. Voltage regulator's input voltage can reach 5.5V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6V for operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. There is a DC/DC regulator in this family that belongs to the MCP1253 family. The adjusting voltage regulator's output voltage is maintain at 5V. 8 pins are used for switching regulator operation. Ideally this switch regulator should have an output voltage of about 5V at the very least. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 120mA A. 2.1V V supply voltage ensures reliable performance of adjusting voltage regulator. A maximum supply voltage of 5.5V is required for adjusting voltage regulator to operate.
MCP1253T-33X50I/MS Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MCP1253T-33X50I/MS Applications
There are a lot of Microchip Technology MCP1253T-33X50I/MS Voltage Regulators applications.
- Constant current circuits
- Network technology
- Lathes
- Low output voltage switching power supply circuits
- Domestic water pumps
- Electrical distribution systems
- Pipe bending machines
- Computer monitoring equipment of building
- SMT equipment
- Geothermal power
