MCP1253T-ADJI/MS
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1253 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Current - Output | 120mA |
| Max Output Voltage | 5.5V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.5V |
| Switcher Configuration | BUCK-BOOST |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
MCP1253T-ADJI/MS Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. Throughout this voltage regulator, there are 8 terminations. A SWITCHED CAPACITOR REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space savings are achieved by placing this voltage regulator in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are 1 outputs configured on this voltage regulator 12v. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. This voltage regulator 12v fits the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 1MHz for this voltage regulator 12v. A dc to dc voltage regulator's minimum input voltage of 2V is required for this voltage regulator to operate. Featuring a 120mA output current, dc to dc voltage regulator offers maximum design flexibility. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. There is a subcategory called Switching Regulator or Controllers that includes this voltage regulator. This DC/DC regulator belongs to the MCP1253 family. The adjusting voltage regulator's output voltage is maintain at 5.5V. The switching regulator operation of the system is controlled by 8 pins. Ideally this switch regulator should have an output voltage of about 1.5V at the very least. With a maximum output voltage of 5.5V, DC DC switching regulator has a very high efficiency. In this case, a dc to dc voltage regulator's minimum supply voltage of 2V volts is required to ensure reliable performance. An operating voltage of 5.5V is the maximum supply voltage DC DC switching regulator can operate at.
MCP1253T-ADJI/MS Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MCP1253T-ADJI/MS Applications
There are a lot of Microchip Technology MCP1253T-ADJI/MS Voltage Regulators applications.
- Magnetohydrodynamic power
- Injection molding machinery
- Plate bending machines
- Scientific research
- Current source circuits
- Grinders
- Industrial controllers
- Digital display device
- Shearing machines
- Photovoltaic power
