MCP1256-E/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1256 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 84.5 % |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 100mA |
| Voltage - Input (Min) | 1.8V |
| Input Voltage-Nom | 2V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 3.3V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 650kHz |
| Synchronous Rectifier | No |
| Nominal Output Voltage | 3.3V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1256-E/UN Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. This harley voltage regulator has 10 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHED CAPACITOR REGULATOR-type IC. In order to save space, this harley voltage regulator is available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are 1 outputs configured on the voltage regulator. Adjusting voltage regulator's output pins generate Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. This voltage regulator 12v should operate at a temperature of -40°C~125°C TJ when operating. The switching frequency of this DC-DC switching regulator reaches 650kHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 1.8V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 2V for the purposes of operation. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. As a member of the MCP1256 family of DC/DC regulators, this is a DC/DC regulator. There is a possibility that DC DC switching regulator can give voltage at 3.3V volts. There are 10 pins that are used for the operation of the voltage regulator 12v. A maximum output current of 100mA A is provided to meet the switching regulator operation requirements. With a maximum output voltage of 3.3V, DC DC switching regulator has a very high efficiency. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 1.8V V. As long as the supply voltage is greater than 3.6V, the voltage regulator 12v will operate correctly.
MCP1256-E/UN Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
MCP1256-E/UN Applications
There are a lot of Microchip Technology MCP1256-E/UN Voltage Regulators applications.
- Printing equipment
- Thermal power
- Textile machinery
- Production lines
- Automatic testing equipment
- Emergency lighting monitoring equipment
- Flaw detection equipment
- Medical equipment
- Product burn-in
- Boring machines
