MCP1257-E/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1257 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 84.5 % |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 100mA |
| Voltage - Input (Min) | 1.8V |
| Input Voltage-Nom | 2V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 3.3V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 650kHz |
| Synchronous Rectifier | No |
| Nominal Output Voltage | 3.3V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1257-E/UN Overview
It is designed to provide optimal performance by utilizing the Tube package. During the development of this harley voltage regulator, 10 terminations were made. As this regulator voltage is equipped with an analog IC of the type SWITCHED CAPACITOR REGULATOR, it is a SWITCHED CAPACITOR REGULATOR-type voltage regulator. Space-saving 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packages are available for this harley voltage regulator. The voltage regulator is configured with 1 outputs. This DC DC switching regulator generates Fixed output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. DC-DC switching regulators reach 650kHz switching frequencies. A dc to dc voltage regulator's minimum input voltage of 1.8V is required for this voltage regulator to operate. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 2V is provided. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. DC/DC regulators of this type are part of the MCP1257 family of voltage regulator 12vs. Voltage regulator is capable of giving voltage at 3.3V volts. There are 10 pins that are used for the operation of the voltage regulator 12v. A 100mA A maximum output current is required to meet the switching regulator operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 3.3V. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 1.8V V is required. DC DC switching regulator can operate from a maximum supply voltage of 3.6V.
MCP1257-E/UN Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
MCP1257-E/UN Applications
There are a lot of Microchip Technology MCP1257-E/UN Voltage Regulators applications.
- Alternators
- Overvoltage protection circuits in TV sets
- Machining centers
- Smart grid
- Printing equipment
- USB circuits
- Bending machines
- Medical monitoring systems
- Refrigerators of central air conditioners
- Elevator lighting
