Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1998 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP130 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
60μA |
Nominal Supply Current |
60μA |
Max Supply Current |
60μA |
Adjustable Threshold |
NO |
Quiescent Current |
45μA |
Accuracy |
-5 % |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.625V |
Number of Voltages Monitored |
1 |
Reset Timeout |
150ms Minimum |
Min Reset Threshold Voltage |
2.55V |
Max Reset Threshold Voltage |
2.7V |
Threshold Voltage |
+2.63V |
Undervoltage Threshold |
2.55V |
Overvoltage Threshold |
2.7V |
Height |
1.55mm |
Length |
5mm |
Width |
3.99mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP130-270I/SN Overview
This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 8 pins that are attached to IC management. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 60μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP130, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.
MCP130-270I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-270I/SN Applications
There are a lot of Microchip Technology MCP130-270I/SN Voltage Supervisors applications.
- Multi-voltage system
- Utility meter
- Microprocessor system
- Rechargeable batteries
- Leakage protection
- Smartphones
- Low voltage/high power - AI, GPU
- Military communications
- Set top box
- Leakage current detection