banner_page

MCP130-315DI/TO

5V3 Terminals 3-Pin MCP130 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP130-315DI/TO
  • Package: TO-226-3, TO-92-3 (TO-226AA)
  • Datasheet: PDF
  • Stock: 346
  • Description: 5V3 Terminals 3-Pin MCP130 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Terminal Position BOTTOM
Number of Functions 1
Supply Voltage 5V
Base Part Number MCP130
Output Open Drain or Open Collector
Pin Count 3
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 60μA
Nominal Supply Current 60μA
Max Supply Current 60μA
Adjustable Threshold NO
Quiescent Current 45μA
Accuracy -5 %
Watchdog Timer No
Reset Active Low
Voltage - Threshold 3.075V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Min Reset Threshold Voltage 3V
Max Reset Threshold Voltage 3.15V
Threshold Voltage +3.08V
Undervoltage Threshold 3V
Overvoltage Threshold 3.15V
Height 4.95mm
Length 4.95mm
Width 3.94mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-226-3, TO-92-3 (TO-226AA)
Number of Pins 3
Operating Temperature -40°C~85°C TA
Packaging Bulk
Published 1998
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS

MCP130-315DI/TO Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Bulk-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. By Through Hole, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 60μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MCP130, the base PMIC number. The power management can work with a maximum supply temperature of 60μA.

MCP130-315DI/TO Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP130-315DI/TO Applications


There are a lot of Microchip Technology MCP130-315DI/TO Voltage Supervisors applications.

  • Electrical fire monitoring system
  • Embedded computing
  • Smartphones
  • Multi-voltage system
  • Transformer load monitoring equipment
  • Rechargeable batteries
  • Microcontroller system
  • emergency room
  • Detection of phase sequence
  • Utility meter

Write a review

Note: HTML is not translated!
    Bad           Good