Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP130 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
60μA |
Nominal Supply Current |
60μA |
Max Supply Current |
60μA |
Adjustable Threshold |
NO |
Quiescent Current |
45μA |
Accuracy |
-5 % |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.075V |
Number of Voltages Monitored |
1 |
Reset Timeout |
150ms Minimum |
Min Reset Threshold Voltage |
3V |
Max Reset Threshold Voltage |
3.15V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3V |
Overvoltage Threshold |
3.15V |
Height |
1.55mm |
Length |
5mm |
Width |
3.99mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP130-315I/SN Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. Pin count of the power management is 8. IC management can only work with a supply voltage of 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 60μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP130, which is the base power ics number. The maximum supply temperature is 60μA.
MCP130-315I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-315I/SN Applications
There are a lot of Microchip Technology MCP130-315I/SN Voltage Supervisors applications.
- Important electronics for automotive protection
- External alarm
- DC stabilized power supply module
- Urban rail transit weak current power monitoring
- Precision measurement
- Display equipment
- Computer applications
- Utility meter
- Sensitive sensors
- Detection of phase loss