MCP130-450I/SN
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP130 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
MCP130-450I/SN Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tube-packaging is used. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 8 pins. 8 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 60μA. It is always advisable to use MCP130, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 60μA.
MCP130-450I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-450I/SN Applications
There are a lot of Microchip Technology MCP130-450I/SN Voltage Supervisors applications.
- Household appliances
- Important electronics for automotive safety
- Consumer electronics
- Solar power charger
- WiFi router
- DSP
- Rechargeable batteries
- Functional modules
- Power communication system
- Sensitive sensors
