MCP130-460HI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MCP130 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.475V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.48V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.6V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP130-460HI/TO Overview
As you can see, this power management is mounted through 3 terminals. There is a Bulk-packaging method applied to IC management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Manage ics operate at 5V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. Through Hole mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. 3 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Through HoleThe supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 60μA. You can always use MCP130, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 60μA.
MCP130-460HI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-460HI/TO Applications
There are a lot of Microchip Technology MCP130-460HI/TO Voltage Supervisors applications.
- Microcontroller system
- Solar power charger
- Medical-specific insulation monitor
- Leakage current detection
- Household appliances
- Unattended substation automation
- Fire equipment power monitoring system
- Power communication system
- Refrigeration
- Analog circuit
