MCP130-475DI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MCP130 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.62mm |
| Length | 4.71mm |
| Width | 3.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP130-475DI/TO Overview
Power management is mounted through 3 terminals. Power management is packaged in a Bulk way. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 5V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. Through Hole is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. You can always use MCP130, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 60μA can be used with this power management.
MCP130-475DI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-475DI/TO Applications
There are a lot of Microchip Technology MCP130-475DI/TO Voltage Supervisors applications.
- Dash board
- DVR
- Battery cars
- Telecommunications equipment
- Computer applications
- Microprocessor system
- Unattended substation automation
- Rechargeable batteries
- Medical-specific isolation transformer
- Network equipment
