MCP130-485DI/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MCP130 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.725V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.85V |
| Threshold Voltage | +4.73V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.85V |
| Height | 4.62mm |
| Length | 4.71mm |
| Width | 3.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP130-485DI/TO Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Bulk-packaging is used. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Through Hole is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 3. 3 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 60μA is the recommended value. You can always use MCP130, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 60μA.
MCP130-485DI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-485DI/TO Applications
There are a lot of Microchip Technology MCP130-485DI/TO Voltage Supervisors applications.
- Transformer load monitoring equipment
- Fire equipment power monitoring system
- Consumer electronics
- Important electronics for automotive protection
- Power distribution systems of CCU
- Power distribution systems of operating room
- Cloud computing
- Refrigeration
- Telecommunications equipment
- Electric heating appliances
