MCP130-485I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP130 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.725V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.85V |
| Threshold Voltage | +4.73V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.85V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP130-485I/SN Overview
A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. Power managment ic pin count is 8. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supervisor's supply current is specified to 60μA. A similar IC managements number of the manufacturer can always be found by using MCP130, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.
MCP130-485I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-485I/SN Applications
There are a lot of Microchip Technology MCP130-485I/SN Voltage Supervisors applications.
- Detection of phase loss
- Cloud computing
- Dash board
- Important electronics for automotive safety
- Set top box
- Leakage protection
- DSP
- Stable power system
- Sensitive sensors
- Computer applications
