MCP130T-460I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP130 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.475V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.48V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.6V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP130T-460I/SN Overview
This power management consists of 8 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 5V-voltage supply. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supply current of the power management is 60μA. A similar IC managements number of the manufacturer can always be found by using MCP130, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 60μA.
MCP130T-460I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130T-460I/SN Applications
There are a lot of Microchip Technology MCP130T-460I/SN Voltage Supervisors applications.
- Telecommunications equipment
- Power distribution systems of operating room
- Consumer electronics
- Precision measurement
- Embedded computing
- Detection of phase sequence
- Power distribution systems of infant care room
- Dash board
- Medical-specific insulation monitor
- Data storage applications
