MCP131-195I/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Base Part Number | MCP131 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 90μA |
| Max Supply Current | 90μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 1.872V |
| Max Reset Threshold Voltage | 1.929V |
| Threshold Voltage | +1.9V |
| Undervoltage Threshold | 1.872V |
| Overvoltage Threshold | 1.929V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP131-195I/TO Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in the form of a Bulk, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management conducts in a 1-voltage supply. Through Hole mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. 3 pins are present in total in this power management. Power managment ic pin count is 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Through HoleWe recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 90μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP131, which is the base power ics number. Voltage supervisor can work with a supply temperature of 90μA at the most.
MCP131-195I/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131-195I/TO Applications
There are a lot of Microchip Technology MCP131-195I/TO Voltage Supervisors applications.
- External alarm
- Radio
- Set top box
- Low voltage/high power - AI, GPU
- WiFi router
- Important electronics for automotive protection
- Medical-specific insulation monitor
- Embedded computing
- FPGA design
- Refrigeration
