MCP131-240E/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Base Part Number | MCP131 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 90μA |
| Max Supply Current | 90μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 2.285V |
| Max Reset Threshold Voltage | 2.355V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.285V |
| Overvoltage Threshold | 2.355V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP131-240E/TO Overview
It is mounted through 3 terminals on the power management. Packaged in the form of a Bulk, power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management conducts in a 1-voltage supply. The mount is provided by Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 3 pins are located on this power management. This power management system has 3 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Through Hole. Temperature setting for the supervisors should be -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 90μA. It is always advisable to use MCP131, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 90μA can be used.
MCP131-240E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131-240E/TO Applications
There are a lot of Microchip Technology MCP131-240E/TO Voltage Supervisors applications.
- Analog circuit
- Digitally controlled LDO regulators circuit
- Detection of phase sequence
- Rechargeable batteries
- Smartphones
- Computer applications
- DC stabilized power supply module
- WiFi router
- DVR
- Linux and server computing
