banner_page

MCP131-300E/TO

3 Terminals 3-Pin MCP131 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP131-300E/TO
  • Package: TO-226-3, TO-92-3 (TO-226AA)
  • Datasheet: PDF
  • Stock: 620
  • Description: 3 Terminals 3-Pin MCP131 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-226-3, TO-92-3 (TO-226AA)
Number of Pins 3
Operating Temperature -40°C~125°C TA
Packaging Bulk
Published 2004
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Terminal Position BOTTOM
Terminal Form WIRE
Number of Functions 1
Base Part Number MCP131
Output Open Drain or Open Collector
Pin Count 3
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 90μA
Nominal Supply Current 1μA
Max Supply Current 90μA
Adjustable Threshold NO
Quiescent Current 1μA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.93V
Number of Voltages Monitored 1
Reset Timeout 80ms Minimum
Min Reset Threshold Voltage 2.866V
Max Reset Threshold Voltage 2.974V
Threshold Voltage +2.93V
Undervoltage Threshold 2.866V
Overvoltage Threshold 2.974V
Height 4.95mm
Length 4.95mm
Width 3.94mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP131-300E/TO Overview


It is mounted through 3 terminals on the power management. Bulk-packaging is used. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. Through Hole is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 3 pins on power management. 3 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 90μA. It is always advisable to use MCP131, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 90μA.

MCP131-300E/TO Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current

MCP131-300E/TO Applications


There are a lot of Microchip Technology MCP131-300E/TO Voltage Supervisors applications.

  • Battery-powered equipment
  • Insulation fault location system
  • Smart meter
  • Radio
  • Electrical fire monitoring system
  • Battery cars
  • Kitchen appliances
  • Military communications
  • Consumer electronics
  • Microprocessor system

Write a review

Note: HTML is not translated!
    Bad           Good