MCP131-450E/TO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Base Part Number | MCP131 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 90μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 90μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 4.314V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.314V |
| Overvoltage Threshold | 4.446V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP131-450E/TO Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Bulk-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Through Hole-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. 3 pins make up the power management. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 90μA. To find similar IC managements from the manufacturer, you can always search by MCP131. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 90μA.
MCP131-450E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131-450E/TO Applications
There are a lot of Microchip Technology MCP131-450E/TO Voltage Supervisors applications.
- Medical-specific isolation transformer
- Electronics installed in the vehicle
- Microprocessor system
- Network equipment
- Detection of phase loss
- Stable power system
- Battery-powered equipment
- Dash board
- Sensitive sensors
- Multi-voltage system
