Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-226-3, TO-92-3 (TO-226AA) |
Number of Pins |
3 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Bulk |
Published |
2004 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Terminal Position |
BOTTOM |
Terminal Form |
WIRE |
Number of Functions |
1 |
Base Part Number |
MCP131 |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
90μA |
Nominal Supply Current |
1μA |
Max Supply Current |
90μA |
Adjustable Threshold |
NO |
Quiescent Current |
1μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
4.63V |
Number of Voltages Monitored |
1 |
Reset Timeout |
80ms Minimum |
Min Reset Threshold Voltage |
4.561V |
Max Reset Threshold Voltage |
4.7V |
Threshold Voltage |
+4.63V |
Undervoltage Threshold |
4.561V |
Overvoltage Threshold |
4.7V |
Height |
4.95mm |
Length |
4.95mm |
Width |
3.94mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP131-475E/TO Overview
A total of 3 terminals are used to mount this power management. Packaged in the form of a Bulk, power management is easy to use. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Through Hole. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 3. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Through Hole is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 90μA. You can always use MCP131, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 90μA can be used with this power management.
MCP131-475E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131-475E/TO Applications
There are a lot of Microchip Technology MCP131-475E/TO Voltage Supervisors applications.
- Precision measurement
- Power distribution systems of ICU
- Battery-powered equipment
- Efficient information transmission
- Smartphones
- Telecommunications equipment
- Refrigeration
- Computer applications
- Fire equipment power monitoring system
- Electronics installed in the vehicle