MCP1316MT-29ME/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Simple Reset/Power-On Reset |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MCP1316M |
| Output | Open Drain or Open Collector |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1μA |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 29mV |
| Max Reset Threshold Voltage | 174mV |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1316MT-29ME/OT Overview
Power management is mounted through 5 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SC-74A, SOT-753 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Manage ics operate at 3V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. The pins of the power management system count 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 1μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by MCP1316M. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA.
MCP1316MT-29ME/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current
MCP1316MT-29ME/OT Applications
There are a lot of Microchip Technology MCP1316MT-29ME/OT Voltage Supervisors applications.
- Set top box
- Important electronics for automotive protection
- emergency room
- Power distribution systems of operating room
- Embedded computing
- Multi-voltage system
- WiFi router
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Consumer electronics
