MCP1316T-29AE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Power Dissipation | 240mW |
| Base Part Number | MCP1316 |
| Output | Push-Pull, Totem Pole |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Min Reset Threshold Voltage | 2.857V |
| Max Reset Threshold Voltage | 2.944V |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1316T-29AE/OT Overview
A Cut Tape (CT) package is used to package the power management. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. There are 5 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 10μA. A similar IC managements number of the manufacturer can always be found by using MCP1316, the base power ics number. A maximum supply temperature of 10μA can be used.
MCP1316T-29AE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1316T-29AE/OT Applications
There are a lot of Microchip Technology MCP1316T-29AE/OT Voltage Supervisors applications.
- Display equipment
- Analog circuit
- Embedded computing
- Detection of phase loss
- Household appliances
- Utility meter
- Smart meter
- Transformer load monitoring equipment
- Multi-voltage system
- Microcontroller system
