MCP1316T-29LE/OT
| Parameters | |
|---|---|
| Length | 3.0988mm |
| Width | 1.8034mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1316 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.857V |
| Max Reset Threshold Voltage | 2.944V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Height | 1.2954mm |
MCP1316T-29LE/OT Overview
As you can see, this power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. Power managment ic pin count is 5. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 10μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP1316, which is the base power ics number. A maximum supply temperature of 10μA can be used with this power management.
MCP1316T-29LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1316T-29LE/OT Applications
There are a lot of Microchip Technology MCP1316T-29LE/OT Voltage Supervisors applications.
- DVR
- Transformer load monitoring equipment
- Radar
- Power distribution systems of CCU
- Sensitive sensors
- Magnetic resonance imaging
- FPGA design
- Display equipment
- Solar power charger
- Battery-powered equipment
