MCP1318T-29LE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1318 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.857V |
| Max Reset Threshold Voltage | 2.944V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1318T-29LE/OT Overview
There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. 5 pins are present in total in this power management. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 10μA. To find similar IC managements from the manufacturer, you can always search by MCP1318. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA.
MCP1318T-29LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1318T-29LE/OT Applications
There are a lot of Microchip Technology MCP1318T-29LE/OT Voltage Supervisors applications.
- Power distribution systems of operating room
- Digitally controlled LDO regulators circuit
- Refrigeration
- FPGA design
- Electrical fire monitoring system
- Precision measurement
- Urban rail transit weak current power monitoring
- Efficient information transmission
- Medical-specific insulation monitor
- Electronics installed in the vehicle
