MCP1319MT-29LE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1319M |
| Output | Open Drain, Push-Pull |
| Pin Count | 5 |
| Output Voltage | 300mV |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Nominal Input Voltage | 5.5V |
| Min Reset Threshold Voltage | 2.857V |
| Max Reset Threshold Voltage | 2.944V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1319MT-29LE/OT Overview
A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 5 pins. 5 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 10μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to MCP1319M, the base PMIC number. Voltage supervisor can work with a supply temperature of 10μA at the most.
MCP1319MT-29LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1319MT-29LE/OT Applications
There are a lot of Microchip Technology MCP1319MT-29LE/OT Voltage Supervisors applications.
- Transformer load monitoring equipment
- Refrigeration
- Analog circuit
- Battery-powered equipment
- Detection of phase imbalance
- Insulation fault location system
- Military communications
- Smartphones
- Computer applications
- emergency room
