MCP1319MT-46LE/OT
| Parameters | |
|---|---|
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Nominal Input Voltage | 5.5V |
| Min Reset Threshold Voltage | 4.531V |
| Max Reset Threshold Voltage | 4.669V |
| Threshold Voltage | +4.6V |
| Undervoltage Threshold | 4.531V |
| Overvoltage Threshold | 4.669V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1319M |
| Output | Open Drain, Push-Pull |
| Pin Count | 5 |
| Output Voltage | 300mV |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
MCP1319MT-46LE/OT Overview
There are 5 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. The supervisor's supply current is specified to 10μA. To find similar IC managements from the manufacturer, you can always search by MCP1319M. A maximum supply temperature of 10μA can be used with this power management.
MCP1319MT-46LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1319MT-46LE/OT Applications
There are a lot of Microchip Technology MCP1319MT-46LE/OT Voltage Supervisors applications.
- Leakage current detection
- Military communications
- DVR
- Network equipment
- Urban rail transit weak current power monitoring
- Magnetic resonance imaging
- Dash board
- Satellite navigation
- Power communication system
- WiFi router
