MCP131T-240E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP131 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 90μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 90μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 2.285V |
| Max Reset Threshold Voltage | 2.355V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.285V |
| Overvoltage Threshold | 2.355V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP131T-240E/TT Overview
It is mounted through 3 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 3. 3 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 90μA. A similar IC managements number of the manufacturer can always be found by using MCP131, the base power ics number. The power management can work with a maximum supply temperature of 90μA.
MCP131T-240E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131T-240E/TT Applications
There are a lot of Microchip Technology MCP131T-240E/TT Voltage Supervisors applications.
- DSP
- Analog circuit
- Multi-voltage system
- Leakage current detection
- Magnetic resonance imaging
- Automotive permanent magnet synchronous motors
- Personal computers
- Power distribution systems of CCU
- FPGA design
- Medical-specific insulation monitor
