MCP131T-475E/LB
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP131 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 90μA |
| Max Supply Current | 90μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 4.561V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.561V |
| Overvoltage Threshold | 4.7V |
| Length | 2.025mm |
MCP131T-475E/LB Overview
A total of 3 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 3 pins on power management. There are 3 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. As far as the supply current of the power management is concerned, it is 90μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP131, which is the base power ics number. The maximum supply temperature voltage supervisor can handle is 90μA.
MCP131T-475E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131T-475E/LB Applications
There are a lot of Microchip Technology MCP131T-475E/LB Voltage Supervisors applications.
- Radio
- emergency room
- Detection of phase imbalance
- Electronics installed in the vehicle
- Set top box
- Electric heating appliances
- Digitally controlled LDO regulators circuit
- Unattended substation automation
- External alarm
- Telecommunications equipment
