banner_page

MCP1320T-29BE/OT

5V5 Terminals MCP1320 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP1320T-29BE/OT
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 874
  • Description: 5V5 Terminals MCP1320 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
Type Simple Reset/Power-On Reset
Max Power Dissipation 240mW
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Base Part Number MCP1320
Output Open Drain or Open Collector
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 10μA
Nominal Supply Current 10μA
Power Dissipation 240mW
Max Supply Current 10μA
Adjustable Threshold NO
Quiescent Current 1μA
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 2.9V
Number of Voltages Monitored 1
Reset Timeout 1ms Minimum
Min Reset Threshold Voltage 2.857V
Max Reset Threshold Voltage 2.944V
Undervoltage Threshold 2.857V
Overvoltage Threshold 2.944V
Length 2.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~125°C TA
Packaging Cut Tape (CT)
Published 2012
Pbfree Code yes
Part Status Discontinued

MCP1320T-29BE/OT Overview


A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Cut Tape (CT) model. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In a 5V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. This power management system has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. You can always use MCP1320, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 10μA.

MCP1320T-29BE/OT Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MCP1320T-29BE/OT Applications


There are a lot of Microchip Technology MCP1320T-29BE/OT Voltage Supervisors applications.

  • Battery cars
  • Radar
  • Electric heating appliances
  • Low voltage/high power - AI, GPU
  • Power distribution systems of ICU
  • Stable power system
  • Battery-powered equipment
  • Unattended substation automation
  • Analog circuit
  • Set top box

Write a review

Note: HTML is not translated!
    Bad           Good