MCP1320T-29LE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1320 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Max Output Current | 4mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Max Output Voltage | 300mV |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Reset Timeout | 140ms Minimum |
| Max Input Voltage | 5.5V |
| Min Reset Threshold Voltage | 2.857V |
| Max Reset Threshold Voltage | 2.944V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1320T-29LE/OT Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. The pins of the power management system count 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 10μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MCP1320. A maximum supply temperature of 10μA can be used. The architecture of this IC management supports 1 outputs.
MCP1320T-29LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1320T-29LE/OT Applications
There are a lot of Microchip Technology MCP1320T-29LE/OT Voltage Supervisors applications.
- Detection of phase imbalance
- Medical-specific insulation monitor
- Precision measurement
- Detection of phase loss
- Microprocessor system
- Automotive permanent magnet synchronous motors
- Radio
- Rechargeable batteries
- Radar
- Linux and server computing
